B-Tough™ A1 by Cargill is an epoxy functional, reactive toughening agent with lowest polarity. It provides impact strength to structural adhesives without impacting the hardness of the matrix... view more

B-Tough™ A2 by Cargill is a low polarity, epoxy functional, reactive toughening agent. It offers impact strength to structural adhesives without impacting the hardness of the matrix. It protects... view more

B-Tough™ A3 by Cargill is a medium polarity, epoxy functional, reactive toughening agent. It provides impact strength to structural adhesives without impacting the hardness of the matrix. It... view more

Priplast™ 3187 by Cargill is a vegetable-oil based, di-functional polyester polyol. It is designed for high performing PU adhesives and sealants. It provides good hydrolytic stability, strong... view more

Priplast™ 3238 by Cargill is an amorphous polyester polyol. It serves as a versatile building block for bio-based polyurethane systems such as adhesives and sealants. Provides excellent color, good... view more

Benzoflex™ 9-88 plasticizer by Eastman is a high solvating plasticizer. Benzoflex™ 9-88 plasticizer is used in cyanoacrylate adhesives, latex caulks, polysulfide sealants, polyurethane adhesives and... view more

Eastman VersaMax™ Plus plasticizer is a non-phthalate, general purpose solution that provides better efficiency, improved dry times and lower fusion temperatures when compared to di-isononyl... view more

Eastman 168™ non-phthalate plasticizer by Eastman is a non-orthopthalate, general purpose plasticizer for PVC. Possesses performance equal or better than most ortho-phthalate plasticizers. Offers... view more

Eastman VersaBond™ Plasticizer is a phthalate-free blend of esters (100% concentration) by Eastman. Exhibits better shore hardness, viscosity, tensile strength and water uptake as compared to... view more

Benzoflex™ 50 plasticizer by Eastman is a versatile benzoate ester plasticizer. It is known for its exceptional performance in polyvinyl acetate and water-based adhesives. It is used in EVA... view more

THIXATROL® AS 8053 by Elementis is diamide-based low temperature activation rheological modifier and highly effective organic thixotrope. It is labeling-free and is based on renewable raw material sources... view more

THIXATROL® PM 8056 by Elementis is a cost effective, seed resistant organic rheological modifier. Designed for sealant applications. Provides high viscosity, thixotropy and thick layer sag control in high... view more

RHEOLATE® 185 by Elementis is a low to mid-shear, low viscosity, solvent- & APEO-free, acrylic thickener. This shear thinning rheological additive is a cost-effective alkali soluble associative... view more

KANEKA SILYL™ SAX220 by Kaneka is a silyl-terminated polyether (STPE) used as a base resin for producing high-performance moisture cure adhesives and sealants utilizing either a hot or cold process... view more

Pearlbond™ 700 EXP by Lubrizol is a linear, polyester-based polyurethane (TPU). It possesses an ultra-fast crystallization rate with an ultra-high thermoplasticity level. It can also be combined... view more

Pearlbond™ 1160L by Lubrizol is a linear, aromatic polyurethane. It is used for obtaining PU films by extrusion (blow and cast) for solvent-free adhesion, by heat-seal process. It shows high... view more

Pearlbond™ 12C75 by Lubrizol is polyester-based thermoplastic polyurethane. It combines hardness with excellent low-temperature flexibility and a low softening point. Pearlbond™ 12C75 is designed... view more

Pearlbond™ 12F75UV by Lubrizol is a UV-resistant, standard polyester-based TPU. It is characterized by low melting point and very low gel content. It is suitable for use in a wide variety of... view more

Pearlbond™ 960 by Lubrizol is an aliphatic, plasticizer-free, polyether-based thermoplastic polyurethane for hot-melt adhesives. It combines excellent mechanical properties with excellent... view more

LIGOS™ A 3003 by Trinseo is a modified styrene butadiene binder. It can also be blended with other materials such as polyvinyl acetate (PVA) or casein to reinforce performances of the final adhesive... view more

LIGOS™ A 3215 by Trinseo is a low VOC modified styrene butadiene binder. It provides high heat & shear resistance, medium peel and tack. It offers good anchorage to film & papers face materials... view more

LIGOS™ A 3006 by Trinseo is a low odor, styrene butadiene (SB) latex binder. It is a premium grade offering good adhesion on difficult substrates. It provides excellent resistance to oil migration... view more

LIGOS™ A 3009 by Trinseo is styrene butadiene (SB) latex binder. It shows excellent adhesion onto paper and offers very good resistance to oil migration. It displays excellent compatibility as a... view more

LIGOS™ A 3011 by Trinseo is styrene butadiene (SB) latex binder. It is a premium grade to formulate liquid glue for wood bonding. LIGOS™ A 3011 is suitable for wood EPI and durable assembly. It is... view more

Cardolite® NX-5607 is phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® NX-5608 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Dynasylan® VPS 7163 by Evonik is a colorless planar isocyanurato functional silane based strong crosslinking agent. It can be used as an adhesion promoter on different types of substrates including metals... view more

ENCOR® 163S by Arkema is high solids all-acrylic binder. Exhibits extraordinary adhesion properties, high pigment binding capacity and excellent exterior durability. ENCOR® 163S is designed for high... view more

ENCOR® 5100 by Arkema is styrene acrylic emulsion. Used in cement modification like flexible sealing slurries, repairing mortars and bond coats, in 2K flexible cement based construction adhesives... view more

Nanostrength® E21 by Arkema is a self-assembling block co-polymer with high butadiene content. It consists of polystyrene, 1, 4-polybutadiene and syndiotactic poly (methyl methacrylate). It... view more

Nanostrength® M53 by Arkema is a high molecular weight, transparent central block of poly (butyl acrylate) surrounded by two poly (methyl methacrylate) blocks. It is a self-assembling block... view more

Oleris® Dibutyl Sebacate by Arkema is a non-toxic dibutyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a cold resistant plasticizer for synthetic resins and rubbers... view more

Proxel™ GXL by Arxada is a 20% aqueous dipropylene glycol solution of 1,2-benzisothiazolin-3-one. It is a biocide for the preservation of industrial water-based products against spoilage from... view more

Drewplus® T-1201 by Ashland is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO) and are available in a variety of cost-effective chemistries based on... view more

Drewplus® T-2200 by Ashland Specialty Chemical is used as a defoamer. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of cost-effective chemistries... view more

Drewplus® T-3200 by Ashland Specialty Chemical is a defoamer or foam control agent. It is formulated without the use of alkylphenolethoxylates (APEO), and are available in a variety of... view more

High performance, non-ionic formulation of silica derivatives, paraffinic oil, esters and water. Used as a foam control agent for water-based systems such as pressure sensitive adhesives and... view more

Drewplus® T-3211 by Ashland Specialty Chemical is a defoamer formulated without the use of alkylphenolethoxylates (APEO). It is available in a variety of cost-effective chemistries based on mineral... view more

N-Vinyl-imidazole (VIM) by BASF is a monomer designed for UV curing adhesives. Exhibits high reactivity, exceptional quality and good consistency. It is the best choice for a wide range of synthesis... view more

N-Vinyl-pyrrolidone by BASF is the best choice for a wide range of syntheses including polymerization, addition and electro-cyclic reactions. Shows high reactivity for radical polymerization... view more

Cyclohexane by Braskem is a high purity, cyclic aliphatic hydrocarbon solvent. It is used in adhesives formulation for footwear, furniture, mattresses, and automotive industries. Cyclohexane has a... view more

Dicyclopentadiene by Braskem is a monomer obtained through the C5 stream. It is used as a raw material in the production of various resins, such as polyesters and hydrocarbon resins in adhesive... view more

BLACK PEARLS® 120 by Cabot is a general-purpose carbon black pigment and opacifying agent. It is easy-to-disperse and has relatively low covering properties. It is a cost-effective way to deliver... view more

BLACK PEARLS® 280 by Cabot is a general-purpose carbon black pigment. It is an effective opacifying agent. It offers good jetness and bluetone in a variety of molded plastics parts. It provides ease... view more

BLACK PEARLS® 460 by Cabot is a general-purpose specialty carbon black suitable for tinting, coloring, and UV applications. It acts as an effective opacifying and weathering agent. BLACK PEARLS® 460... view more

BLACK PEARLS® 570 by Cabot is a specialty carbon black. It exhibits good coloration and covering power. It provides higher levels of jetness in comparison to Cabot’s BLACK PEARLS® 430 and BLACK... view more

High surface area fumed silica which imparts significant increase in viscosity and in reinforcement of sealants. In Cab-o-sil® H-300 high shear dispersion equipment is required to realize its full... view more

Coapur™ 3020 by Coatex (Arkema Group) is a water-borne, non-ionic rheology modifier and thickener. Exhibits good water resistance, excellent flow, homogeneous film build and good leveling. Offers... view more

Coapur™ XS 71 is a non-ionic, water-borne rheology modifier and thickener by Coatex (Arkema Group). Shows improved transfer and good leveling properties. Designed for tapes, labels and pressure... view more

RHEOTECH™ 2800 by Coatex (Arkema Group) is a water-borne, APE-free, hydrophobically modified alkali swellable acrylic (HASE) thickener. It combines the benefits of HASE with flow and leveling... view more

RHEOTECH™ 3800 is a water-borne, hydrophobically modified alkali swellable acrylic (HASE) thickener and rheology modifier by Coatex (Arkema Group). It is a low VOC, APE-free alternative to PU... view more

THIXOL™ 53 L by Coatex (Arkema Group) is a water-borne acrylic thickener and rheology modifier. Designed for tapes and pressure sensitive adhesives. Offers improved transfer and high film thickness... view more

High solid self-crosslinking acrylic emulsion. Offers very fast drying and an excellent adhesion to polyolefin films. Also has bond strength and water as well as heat resistance. Used in industrial... view more

Acrylic styrene copolymer emulsion. Provides adhesion to plastic substrates such as ABS, PS and PC. Has bond strength and water resistance. Used in PET, PVC resins. Also used in industrial... view more

NeoCryl® BT-207 by Covestro is a water-borne alkali-soluble resin with flat pH-viscosity properties. Offers good adhesion to glass, excellent wet tack and a very high as well as stable viscosity profile... view more

NeoCryl® BT-63 by Covestro is an acrylic copolymer emulsion. It is a water-borne alkaline soluble resin. Offers good open time, tack and broad substrate adhesion. Also offers resolubility and good... view more

Metal complexed acrylic copolymer. It is a water-borne alkaline soluble resin. Offers high gloss, glass adhesion and caustic resolubility. Also has water resistance and bond strength. Used in bottle... view more

Crosslinker® CX-300 by DSM is carbodiimide. Acts as a crosslinking agent. Offers bond strength, broad substrate adhesion, performance improvement, heat resistance and ice water resistance. Used in... view more

Haloflex™ H-202 by DSM is vinyl acrylic copolymer latex. It is a water-borne emulsion. Haloflex™ H-202 exhibits low moisture vapor transmission, bond strength, water resistance and an excellent... view more

NeoPac™ E-850 by DSM is an aliphatic urethane acrylic copolymer system. It is a formaldehyde-free resin. Offers bond strength, heat resistance, water resistance, activation temperature and broad... view more

Butyl Acrylate, 15 ppm MEHQ by Dow is used for copolymer-based adhesives. Offers flexibility, weatherability, internal plasticization, adhesion, range of hardness and resistance to abrasion as well as oil or... view more

DOWFAX™ 63N10 Nonionic Surfactant by Dow is linear EO/PO block copolymer-based foam control agent. It is produced by polymerizing ethylene oxide (EO), propylene oxide (PO), and/or butylene oxide... view more

Methyl Methacrylate, 15 ppm AO-30 by Dow offers hardness and flexibility. It also exhibits clarity, color compatibility, toughness, internal plasticization and weatherability. Methyl Methacrylate... view more