Cardolite® NX-2026 is a high purity cardanol, bio-based diluent, resin modifier, and accelerator designed for use in adhesives and sealants. It is based on natural, renewable, non-food raw material... view more

Cardolite® Ultra LITE 513 by Cardolite is a low viscosity, mono-functional epoxy reactive diluent. The long hydrophobic aliphatic side chain of cardanol gives this product a very low viscosity and... view more

Cardolite® LITE 3040 is a solvent free, low viscosity phenalkamide epoxy curing agent by Cardolite. Exhibits excellent mechanical properties and excellent adhesion. Provides outstanding durability... view more

Cardolite® NX-5594 is a phenalkamine epoxy curing agent that has favorable labeling, faster cure at low temperature, i.e. 0°C. Utilized as a solvent free hardener for epoxy adhesives and as a... view more

Cardolite® GX-3090 is a solvent free and very low viscosity phenalkamide epoxy curing agent. Exhibits excellent mechanical properties, faster strength development, and good adhesion at recommended... view more

THIXATROL® ST by Elementis is an organically modified castor oil derivative used as a rheological additive. Increases the viscosity and provides thixotropy. It contributes to pigment suspension and... view more

DENACOL® GEX-313 by Nagase ChemteX is a specialized, multi-functional, aliphatic-type epoxy crosslinking agent. It is produced by the glycidyl etherification of a naturally derived glycerol using palm... view more

DENACOL® GEX-521 by Nagase ChemteX is a specialized, multi-functional, aliphatic-type epoxy crosslinking agent. It possesses a high crosslinking density and moderate viscosity. It is produced by the glycidyl... view more

DENACOL® GEX-614B by Nagase ChemteX is a tetrafunctional, aliphatic-type epoxy crosslinking agent. It is produced by the glycidyl etherification of corn-based sorbitol using palm oil-based epichlorohydrin. It... view more

DENACOL® GEX-622 by Nagase ChemteX is a tetrafunctional, aliphatic-type epoxy crosslinking agent. It is produced by the glycidyl etherification of corn-based sorbitol using palm oil-based epichlorohydrin. It... view more

BAER™ XP-9500 by ACS Technical Products is a highly functional, non-hazardous, formaldehyde-, BPA- and epichlorohydrin-free curing agent. It is a bio-based, aliphatic liquid epoxy resin designed for adhesives. It... view more

EPOXOL® CA118 by ACS Technical Products is an environment-friendly, VOC-free, non-yellowing & non-fugitive aliphatic coalescent and plasticizer. It has a high bio-derived content, making it an excellent choice for... view more

EPOXOL® EM100 by ACS Technical Products acts as a plasticizer and asphalt modifier. It is a bio-derived, highly efficient aliphatic soy ester produced using a patented process. It is compatible with common liquid... view more

EPOXOL® EMS by ACS Technical Products is a zero VOC, non-halogen functional modifier, acid scavenger and plasticizer. It is bio-based, epoxide functional reactive diluent and viscosity reducer. It is a high... view more

EPOXOL® EP159 by ACS Technical Products is a bio-based, non-fugitive & ultra-low VOC coalescing agent and plasticizer. It is non-hazardous with good stability and low HLB. It exhibits good cold temperature... view more

PurelyForm™ XG Tech by ADM is a xanthan gum-based thickener and rheology control agent. It is a standard, gluten-free, consistent, free-flowing, cost-effective and naturally derived hydrocolloid. It... view more

PurelyForm™ XG Tech 200T by ADM is a xanthan gum-based thickener and rheology control agent. It is a standard, gluten-free, consistent, free-flowing, cost-effective and naturally derived hydrocolloid. It... view more

PurelyForm™ XG Tech 80T by ADM is a xanthan gum-based thickener and rheology control agent. It is a standard, gluten-free, consistent, free-flowing, cost-effective and naturally derived hydrocolloid. It... view more

PurelyForm™ XG Tech D by ADM is a xanthan gum-based thickener and rheology control agent. It is a standard, gluten-free, consistent, free-flowing, cost-effective and naturally derived hydrocolloid. It... view more

PurelyForm™ XG Tech DT by ADM is a xanthan gum-based thickener and rheology control agent. It is a standard, gluten-free, consistent, free-flowing, cost-effective and naturally derived hydrocolloid. It... view more

AMITROLIT® 8400 by AGRANA acts as a thickener in aqueous systems. It is also characterized by good adhesiveness and rheology-modifying properties. It is a cold water soluble starch ether. AMITROLIT® 8400 is... view more

AMITROLIT® 8850 by AGRANA acts as a rheology modifier. It is a starch ether used in mineral-based binding systems such as gypsum and cement. It is ecologically friendly and nontoxic grade. It exhibits... view more

AMITROLIT® 8860 by AGRANA acts as a rheology modifier. It is a starch ether used in mineral-based binding systems such as cement. It is ecologically friendly and nontoxic grade. It exhibits high... view more

AMITROLIT® 8869 by AGRANA acts as a rheology modifier. It is a modified special starch that is used in dry mix mortars. It modifies the rheology, allows to adjust open time and increases the water... view more

AMITROLIT® 8872 by AGRANA acts as a rheology modifier. It is a starch ether used in mineral-based binding systems such as cement. It is ecologically friendly and nontoxic grade. It exhibits high... view more

Thermoplastic terpene-phenolic resin primary used for the enhancement of tack in aqueous systems and in contact adhesives. Compatible with high pH polychloroprene latices. Can be blended with other... view more

Aqueous dispersion primarily used for enhancing tack in aqueous adhesive systems. Developed for use with carboxylated polychloroprene latices. (Can be blended with latices which are neutral without... view more

Pentaerythritol ester of rosin. Provides superior tackifying action to synthetic and natural rubber applications for adhesives and hot melts. Highly compatible with the more non-polar elastomers... view more

SP-6600 Resin (Old name: AKROCHEM® P-87) by Akrochem is a cashew nut oil-modified phenol-formaldehyde two-step phenolic resin-based tackifier. It exhibits excellent compatibility in all proportions... view more

SP-6601 Resin (Old name: AKROCHEM® P-55) by Akrochem is a tackifier. It is a tall oil-modified phenol-formaldehyde two-step resin with hexa. The small amount of resin will act as an effective... view more

ALBERDINGK® Albolith MS C 350 Molecular Sieve Paste by Alberdingk Boley is castor oil derivative. Acts as a desiccant. It is mainly composed of ricinoleic acid, a glyceride that does not otherwise... view more

ALBERDINGK® Albothix 82-32 Thixotropic Agent by Alberdingk Boley is a castor oil derivative. Acts as a HCO-based thixotropic agent. It is suitable for low and medium polar systems. It is mainly... view more

ALBERDINGK® Albothix 85-32 Thixotropic Agent by Alberdingk Boley is a castor oil derivative. It is a modified HCO-based thixotropic agent. Shows better temperature stability. It is mainly composed... view more

CASTOR OIL USP by Alnor Oil Company is bio-based, triglyceride oil derived from the seed of the castor plant, genus Ricinus communis. It is recommended for adhesive application... view more

Castor Oil (Alnor) by Alnor Oil Company is bio-based, natural oil obtained from the seed of the Ricinus Communis or castor plant. It is unique among naturally occurring oils in that in that it is the only... view more

Low Moisture Castor Oil by Alnor Oil Company is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has a slight characteristic odor. It is produced by removing the moisture... view more

Neutralized Castor Oil by Alnor Oil Company is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has faint odor and has been bleached to reduce the acid value. Neutralized Castor Oil is... view more

Pale Pressed Castor Oil by Alnor Oil Company is bio-based, natural oil obtained from the seed of the Ricinus Communis or castor plant. It has a very slight characteristic odor. It is obtained from the first pressing of... view more

Wood Flour by American Wood Fibers is a natural filler and extender in various glue formulations. From the most sophisticated epoxy resins to good old fashion wood glue, wood flour can improve their... view more

Biofene® by Amyris is a tackifier based on renewable, long-chain, branched hydrocarbon molecule called farnesene (trans-ß-farnesene). It replaces compounds made from petrochemicals, with renewable... view more

803L by Arakawa Chemical is terpene phenolic resin derived from rosin, resin from pine trees. Used as a tackifier in chloroprene and hot melt adhesives. 803L offers high softening point and heat... view more

Ester Gum 105 by Arakawa Chemical is rosin ester. It is used as a tackifier in hot melt adhesives. It offers good weather resistance... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more

Rosin ester. Used as a tackifier in hot melt adhesives. Offers good compatibility with EVA and natural and synthetic rubber... view more